High-Frequency PCB Manufacturing for RF & Microwave
Precision high-frequency and microwave circuit board fabrication with Rogers, Taconic, Arlon, and PTFE laminates. Delivering tight dielectric constant tolerance (Dk 2.14–4.0 ±0.02), ultra-low dissipation factor (Df <0.002), and controlled impedance across 0–128 GHz radar and 5G transceiver bands.
CAPABILITY & TOLERANCES
Engineering Data & Manufacturing Abilities
Quantified dielectric limits, high-frequency signal integrity thresholds, and RF production capabilities.
Sub-6GHz 5G Transceiver · 24-77GHz Automotive ADAS · 128GHz mmWave
Standard FR4 0.020 · Mid-Loss 0.008 · Low-Loss 0.0037 · Rogers PTFE 0.0012
Polar Si9000 modeling with 100% coupon TDR microstrip verification
Precision dimensional stability with specialized lamination pressure curves
Sodium naphthalene & gas plasma desmear for 100% PTFE hole wall adhesion
Rogers 4350B/4003C + High-Tg FR4 mixed sequential lamination with low-flow prepreg
CASES
Recent Case Gallery
Manufactured for global 5G telecom base stations, automotive millimeter-wave radars, and satellite communication systems.
Rogers RO4350B Multilayer Radar PCB
2-Layer · Dk 3.48 · ENIG Finish
Double-Sided 5G Transceiver Board
2-Layer · Taconic RF-35 · Immersion Silver
PTFE Teflon Satellite RF Board
2-Layer · Dk 2.2 · Immersion Gold
High-Speed 128 Gbps Digital Backplane
16-Layer · Panasonic Megtron 6 · Low Df
Rogers High Frequency Power Divider
2-Layer · Pure PTFE · Edge Plated Shielding
Taconic Microwave Filter Board
4-Layer · Taconic TLX-8 · ±5% ImpedanceENGINEERING & SOURCING ADVISORY
Frequently Asked Questions
Key considerations for specifying materials, controlled impedance, and manufacturing high-frequency PCBs.
Which high-frequency and microwave laminate materials do you stock?
We stock genuine Rogers (RO4350B, RO4003C, RO3003, RO3006, RT/duroid 5880/6002), Taconic (TLX, TLY, RF-35), Arlon, Isola (Astra MT77, IS620), Panasonic (Megtron 6, Megtron 7), and Shengyi high-speed substrates covering dielectric constants (Dk) from 2.14 to 10.2.
How do you verify controlled impedance on RF transmission lines?
We calculate exact stackup parameters with Polar Si9000 field solvers. Every production panel includes dedicated microstrip and coplanar waveguide test coupons verified 100% via high-bandwidth Time Domain Reflectometry (TDR) to guarantee ±8% (or ±5 Ω) tolerances.
Do you support hybrid mixed-dielectric lamination (e.g. Rogers + FR4)?
Yes. To optimize BOM cost while maintaining RF performance on top/bottom signal layers, we specialize in multi-stage hybrid lamination combining Rogers/PTFE with high-Tg FR4 (Shengyi S1000-2/Isola 370HR) across up to 4 sequential lamination cycles.
How do you ensure reliable through-hole plating in pure PTFE materials?
PTFE surfaces are naturally hydrophobic and chemically inert. We utilize automated plasma etching and sodium naphthalene chemical treatment to activate the hole walls prior to electroless copper deposition, ensuring 100% adhesion and zero barrel voiding.
What surface finishes do you recommend for microwave and mmWave designs?
Electroless Nickel Immersion Gold (ENIG), Immersion Silver (which eliminates the nickel loss effect at high frequencies >10 GHz), and ENEPIG are recommended. Immersion silver is especially favored for 24GHz and 77GHz radar arrays due to its minimal skin-effect loss.
What is the turnaround lead time for RF and microwave prototypes?
Double-sided Rogers/Taconic prototypes ship in 3–5 working days. Multilayer hybrid RF boards (4–12 layers) complete in 5–8 working days. Standard production batches ship within 10–14 working days.